Thermo Scientific QuantStudio 1 - Workflow: Install and Connect to a Network

Install and connect the instrument
to a network
■
Workow: Install and connect to a network .............................. 77
■
Before you begin ..................................................... 78
■
Instrument and computer connections .................................. 78
■
Unpack and install the instrument ...................................... 79
■
Power on and follow the startup wizard ................................. 80
■
Connect the instrument and the computer directly or to a LAN ............. 80
■
Networking ......................................................... 81
Workflow: Install and connect to a network
Perform all steps in “Before you begin“ on page 78
▼
“Unpack and install the instrument“ on page 79
▼
“Power on and follow the startup wizard“ on page 80
▼
“Perform instrument verification using RNase P plates“ on page 57
▼
“Connect the instrument and the computer directly or to a LAN“ on page 80
A
QuantStudio
™
1 Real-Time PCR System Installation, Use, and Maintenance Guide
77