Thermo Scientific QuantStudio 1 - Require Instrument Profile Sign-In (Administrator Only); Manage the Sign out Timer (Administrator Only); Manage Instrument Profiles

1.
In the home screen, touch Seings4Manage Users4Sign In Required.
2.
Slide the control On.
Only signed-in users are allowed to access the instrument for any task, including
access to Seings.
3.
Touch Done.
1.
In the home screen, touch Seings4Manage Users4Sign Out Timer.
2.
Touch the Edit Time eld, then enter the desired duration of inactivity before
automatic user sign out.
3.
Touch Enter, then touch Done.
Note: An instrument prole is a user account specically for the instrument. It is not
related to any other user account for the system or software.
To
See
Create a profile
• “Create an administrator instrument profile during initial start-up“ on page 27
• “Create a new instrument profile“ on page 27
Configure a profile
• “Link an instrument profile with the Thermo Fisher Cloud“ on page 38
• “Edit an instrument profile“ on page 37
View or manage all
profiles
• “Manage all instrument profiles (Administrator only)“ on page 37
Edit an instrument profile
1.
In the home screen, touch
My Prole.
Note: Administrators can also navigate to this screen by touching
Seings4Manage Users4Manage Proles.
2.
Touch Edit.
3.
Select the elds to edit, then make changes.
4.
Touch Done.
Manage all instrument profiles (Administrator only)
1.
In the home screen, access the All Proles tab.
• Touch My Prole4All Proles.
• Touch Seings4Manage Users4Manage Proles4All Proles.
A list of users, the date the prole was created, and the user type displays.
2.
Select the instrument prole to edit.
Require
instrument profile
sign-in
(Administrator
only)
Manage the
Sign Out Timer
(Administrator
only)
Manage
instrument
profiles
Chapter 3 Configure the instrument and manage instrument profiles
Manage Users
3
QuantStudio
™
1 Real-Time PCR System Installation, Use, and Maintenance Guide
37