Inserting the battery
After removing the old battery, the anode side (+ charge) of the new one must be first
inserted into the battery compartment of the unit.
Replacement batteries can be ordered through our customer service department. Temporarily,
the use of a standard 1.5V battery AA/LR6 is also possible.
After inserting the new battery, the battery cap is now gently pressed against the opening until
the latches on the cap have snapped into place, and then reverted back into the original
position by using the coin.
At that point, the EPD carries out a 10 second self-test (beeping and flashing of the display
screen and the LED).
Returning the batteries
Please also return the exchanged batteries to the monitoring service. We will arrange for
proper and environmentally friendly disposal. This service is free of charge.
FO50KOM27A/ Guide for use 7 As of January 2014
To Previous Page
Loading...
Need help?
General
