Need help?Do you have a question about the Thermo Scientific Nicolet 5700 and is the answer not in the manual?
General| Resolution | Better than 0.09 cm-1 |
|---|---|
| Computer Interface | Ethernet |
| Operating System | Windows |
| Type | FTIR Spectrometer |
| Wavenumber Range | 7, 800 to 350 cm-1 |
| Detector Type | DTGS or MCT |
| Interferometer Type | Dynamically aligned |
| Software | Omnic Software |
| Beamsplitter | KBr |
| Source | Air-cooled |
| Interferometer | DynaScan™ interferometer with dynamic alignment |
| Wavenumber Accuracy | 0.01 cm-1 |
| Spectral Range | 7800 to 350 cm⁻¹ |
| Signal-to-Noise Ratio | Greater than 30, 000:1 (peak-to-peak, 1 minute measurement) |
Warns about electric shock risks from exposed voltages and charged capacitors.
Details DC power cable connector pinouts and voltage outputs for spectrometer power supplies.
Step-by-step guide for safely connecting the spectrometer to an external power supply.
Covers fuse information, electrical service requirements, and line stability.
Emphasizes proper grounding and using appropriate, undamaged power cords.
Warns against staring into the laser beam or tampering with the laser head.
Lists laser class regulations and explains the laser emission indicator light.
Stresses the need for dry air or nitrogen purge to protect optical components from moisture.
To Next Page