Need help?Do you have a question about the Thermo Scientific NITON XL3t 500 and is the answer not in the manual?
General| Model | NITON XL3t 500 |
|---|---|
| Category | Measuring Instruments |
| Detector | Silicon Drift Detector (SDD) |
| Detection Range | Mg to U |
| Connectivity | USB, Bluetooth |
| Type | XRF Analyzer |
| X-Ray Tube | 50 kV |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Display | Color touchscreen |
| Humidity | 0 to 95% RH (non-condensing) |
| Data Storage | Internal memory |
| Software | NITON Data Transfer Software |
| Elemental Detection | From Magnesium (Mg) to Uranium (U) |
Detailed methods and considerations for analyzing bulk samples.
Explanation of the information displayed on the measurement screen.
Techniques for analyzing samples directly in their natural environment.
Procedures for analyzing samples after laboratory preparation.
Procedure for performing a standard calibration of the analyzer's detector.
Procedure to recalibrate the analyzer's touch screen display.
Method to calibrate touch screen using control buttons if touch fails.
Changing calibration settings for specific mining modes.
Information on adjusting calibration factors for improved accuracy.
Procedures for maintaining, cleaning, and repairing the analyzer.
Information on connecting the analyzer via Bluetooth and other networks.
Fundamental principles of radiation protection and minimizing exposure.
Precautions for safe operation of the NITON XL3t analyzer.
Guidelines for safely handling various types of samples during analysis.
Actions to take in case of lost, stolen, or damaged instruments.
To Next Page