Need help?Do you have a question about the Thermo Scientific Partisol 2025i and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | Partisol 2025i |
| Category | Laboratory Equipment |
| Language | English |
Describes the Partisol 2025i and 2025i-D samplers and their sampling capabilities.
Details various inlet systems for PM2.5 and PM10 sampling.
Lists advanced features specific to the Partisol 2025i model.
Lists advanced features specific to the Partisol 2025i-D model.
Lists technical specifications for the Partisol 2025i and 2025i-D samplers.
Lists standard components included with the 2025i and 2025i-D samplers.
Discusses internal systems for maintaining acceptable operating conditions.
Details the procedure for powering on the sampler.
Covers inspection of filters for contamination or damage before use.
Details the procedure for weighing filters before sampling.
Explains how to prepare the filter cassette magazine for use.
Details the procedure for weighing filters after sampling.
Explains how to compute the mass concentration of particulate matter.
Lists components for the VSCC inlet configuration.
Lists components for the WINS PM2.5 inlet configuration.
Lists components for the PM10 inlet configuration.
Details the procedure to convert the sampler from PM2.5 to PM10.
Lists and describes the sampler's operating modes: Stop, Wait, Sampling, Done, Audit.
Explains the Stop mode, used for filter exchange and program definition.
Details the Sampling mode, where the sampler collects samples at defined intervals.
Describes the Error mode, entered when a status condition occurs.
Explains how the sampler behaves after a power failure.
Configures default settings like sample type, times, and other instrument parameters.
Defines global parameters for operation, including time, date, and temp/pressure settings.
Sets global default sampling parameters like method, start/stop times, and flow rate.
Allows selection of sampling program type: Basic, Time2, Advanced, or Episodic.
Explains how to verify sampler performance characteristics before starting a run.
Describes the procedure for performing an external leak check.
Covers temp, pressure, and leak checks before performing flow verification.
Guides the user through programming a sampling run using the Basic Sampling method.
Explains how to verify sampling run status and retrieve data.
Details procedures for performing calibrations and preparing audit magazines.
Guides calibration of the ambient air temperature sensor.
Explains the procedure for calibrating the ambient pressure sensor.
Explains calibration of filter temperature probes for 2025i and 2025i-D.
Covers periodic flow calibrations required for sampler operation.
Describes the 320x240 graphics LCD and cursor movement.
Explains the functions of the front panel pushbuttons for navigation.
Details the multi-functional soft keys used for shortcuts and menu navigation.
Illustrates the menu-driven firmware flowchart and screen displays.
Contains submenus for instrument parameters and settings.
Advises reading safety precautions before performing maintenance.
Lists routine maintenance procedures performed at indicated intervals.
Recommends cleaning size-selective inlets every 14 days.
Details cleaning the cyclone fractionator every 30 days of operation.
Describes periodic maintenance of V-seals, checking every four weeks.
Presents information screens for pressures, voltages, temperatures, and current state.
Provides access to system troubleshooting information, including status codes and alarms.
Offers general information to help isolate and identify instrument problems.
Provides diagrams for troubleshooting board-level faults.
Advises reading safety precautions before performing procedures.
Explains how to update firmware via serial port, Ethernet, or USB.
Lists replacement parts for the Partisol 2025i and 2025i-D.
Identifies optional cables and components for external device connection.
Overview of electronic components and their operating ranges.
Describes the motherboard's role as the main processor and communication hub.
Details the expansion board for analog input/output capabilities.
Explains the digital output board for solenoid drivers and relay contacts.
Details the seller's warranty policy for products, including exclusions and limitations.
Lists Partisol 2025i and 2025i-D C-Link protocol commands with descriptions.
Details commands for reading various measurements and parameters.
Covers commands for configuring data logging and managing records.
Describes commands related to contrast, date/time, and default parameters.
Lists parameters for configuring the serial port for MODBUS RTU protocol.
Describes various function codes supported by the Partisol 2025i and 2025i-D.
Lists MODBUS addresses supported for the Partisol 2025i and 2025i-D.
Explains RPComm software for interactive remote communication with Partisol instrumentation.
Details the steps to install RPComm software onto a computer.
Provides procedures to set up the sampler for direct PC communication.
Covers executing RPComm, creating connections, and downloading data.
Explains how to download filter, interval, and input data.
Explains the fundamental structure of an AK command and response formats.
Lists all supported AK protocol commands with their descriptions.
Provides a list of Program Register Codes (PRC) and their definitions.
To Next Page