Need help?Do you have a question about the Thermo Scientific Star Series and is the answer not in the manual?
General| mV Resolution | 0.1 mV |
|---|---|
| mV Range | -2000 to 2000 mV |
| Temperature Range | -5.0 to 105.0 °C |
| Temperature Resolution | 0.1 °C |
| Display | LCD |
| Connectivity | USB, RS232 (depending on model) |
| Power | Battery or AC adapter |
| Storage Temperature | -20 to 60 °C |
| Humidity | 5 to 85% RH (non-condensing) |
| pH Resolution | 0.01 pH |
| Conductivity Resolution | 0.01 µS/cm to 0.1 mS/cm (varies by range) |
Defines the meaning and function of various icons used on the meter's interface and keypad.
Diagrams showing electrode and probe connections for benchtop and portable meters.
General navigation for selecting calibration modes for pH, Conductivity, and DO.
Steps for performing pH calibration, including Auto-Buffer-Recognition and manual calibration.
Procedure for taking pH measurements in continuous, AUTO-READ, and timed modes.
Steps for preparing and performing DO calibration using various modes (Air, H2O, Manual, Zero).
Procedure for taking DO measurements in continuous, AUTO-READ, and timed modes.
Steps for performing conductivity calibration (Manual, AutoCal, DirectCal).
Procedure for taking conductivity measurements in continuous, AUTO-READ, and timed modes.
Steps for performing ISE calibration, including preparing electrodes and standards.
Procedure for taking ISE measurements after calibration in various modes.
To Next Page