- 4 -
Section I Safety
Warnings
Warnings are posted throughout the manual. These warnings are desig-
nated by an exclamation mark inside an equilateral triangle and text high-
lighted in bold. Read and follow these important instructions. Failure to
observe these instructions can result in permanent damage to the unit,
significant property damage, or personal injury or death.
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit. If you have any
questions concerning the operation of your unit or the information in this
manual, please contact our Sales Department (see After-sale Support).
Never place the unit in a location where excessive heat, moisture, or
corrosive materials are present.
The unit construction provides protection against the risk of electrical
shock by grounding appropriate metal parts. The protection may not
function unless the power cord is connected to a properly grounded
outlet. It is the user's responsibility to assure a proper ground connec-
tion is provided.
Never connect the OUTLET/SUPPLY or INLET/RETURN fitting to your
building water supply or any water pressure source.
Never use flammable or corrosive fluids with this unit. Distilled and
deionized water may be aggressive and cause material corrosion.
Please contact us before subjecting this unit to prolonged exposure to
distilled or deionized water.
Do not use automobile anti-freeze. Commercial anti-freeze contains
silicates that can damage the pump seals. Use of automobile anti-
freeze will void the manufacturers warranty.
Do not replace reservoir plug with a non-vented type or damage to the
tank may occur.
To Next Page
Loading...
