Thermo CFT-25 - Section II General Information; Specifications

- 6 -
Section II General Information
Description
The NESLAB CFT Recirculating Chiller is designed to provide a continuous
supply of cooling fluid at a constant temperature and volume.The unit consists
of an air-cooled refrigeration system, a sealable reservoir, recirculating pump,
and a temperature controller.
Throughout the manual, you will be asked to consult the units serial number
label or the pump identification label for specific information. Both labels are
located on the rear of the unit.
1. 60 Hertz CFT-75s with a "Turbulator" tank have a 2500 watt cooling capacity.
2. Circulating water at 20°C, at 20°C ambient. Cooling capacity will vary depending on fluid
temperature, ambient temperature, and cooling fluid. A PD-1 pump was used in the CFT-25, a
PD-2 in the other units.
3. Modified temperature ranges from -15°C to +85°C are available.
4. CFT-300 stability determined with 86% heat load.
5. 1.25 gallons (4.73 liters) for 50 Hertz CFT-75 units.
1.8
6.8
CFT-25 CFT-33 CFT-75 CFT-150 CFT-300
±1.0°C
1.1
4.2
5.6
21.3
R22R134a
+5°C to +30°C
+5°C to +35°C
±0.5°
Specifications
Cooling Capacity
1,2
Temperature Range
3
Temperature Stability
4
Reservoir Volume
5
Gallons
Liters
Refrigerant
Pollution Degree
12
8
4
5
4
3
2
1
HEAT REMOVAL (KILOWATTS)
0 5 10 15 20 25 30
TEMPERATURE (°C)
C=CFT-150, 60HZ
D=CFT-150, 50HZ
E=CFT-75, 60HZ
F=CFT-75, 50HZ
G=CFT-33, 60HZ
H=CFT-33, 50HZ
I=CFT-25, 60HZ
J=CFT-25, 50HZ
A=CFT-300, 60HZ
B=CFT-300, 50HZ
A
B
C
D
E
F
G
H
I
J
II, IAW IEC 664
0.4
1.4