- 7 -
C
A
B
H
E
Plug
1. Dimension A is the height of the unit. The unit width and depth (dimensions B and C) are the case dimensions, add
approximately 2 inches to include the plumbing connections. The depth case dimension for CFT-75s with "Turbulator"
tanks is 25¾".
2. Dimension D is the distance from the floor to the bottom of the unit case (height of the castors).
3. Dimension E is the distance from the floor to the center of the DRAIN connection (CFT-150/300 only).
4. Dimension F is the distance from the floor of the center of the OUTLET connection.
5. Dimension G is the distance from the floor of the center of the INLET connection.
6. Dimension H is the distance from the unit's left side to the center of the INLET and OUTLET connections.
7. Dimension I is the distance from the unit's left side to the center of the DRAIN connection (CFT-150/300 only).
8. Weights are given in pounds
9. Air intake is given in cubic feet per minute.
Unit Dimensions
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Dimension F
Dimension G
Dimension H
Dimension I
Crate Dimensions
(H x W x D)
Shipping Weight
Air Intake
Electrical Requirements
Volts
Hertz
Phase
CFT25 CFT33 CFT75 CFT150 CFT300
22 24½ 26½ 36¾ 43
12½ 14¾ 14
7
/8 21
3
/8 25½
21 22 24½ 27¾ 27¾
2¾ 2½ 2½ 3½ 2¾
NA NA NA 23½ 29
17
1
/16 18½ 22 32¼ 38¼
20
1
/16 21½ 25 35¼ 41¼
1½ 1 1
1
/8 1
1
/8 1
NA NA NA 6 1
31x23x28 31x23x32 32x23x40 33x29x42 35x33x56
132 160 215 311 450
280 375 800 1050 2500
115V 115V 208/230V 208/230V 208/230V
60Hz 60Hz 60Hz 60Hz 60Hz
11113
NEMA5-15P NEMA5-20P NEMAL6-15P NEMAL6-20P NA
D
F
G
Rev 04/12/99
I
To Next Page
Loading...
