Unpack the instrument.
Install
the
filter
wheel.
Install the lamp.
Plug into mains.
Switch the instmment on.
r
roll. (Printer option)
Select
the
RS-fomat for printer or computer.
Select the plate movement to
k
continuous
or
step wise.
Select
print out on the built-in printer
if
required.
Ifbuilt-in printer, then select printing width.
Ifexternal printer, then select print out spacing.
Select shaking ifrequired.
Select the program module.
Select the measurement parameters.
Select the calculation mode.
Select the calculation parameters.
Save
rhe
program.
Connect printer or computer.
Cheek
the
baud rate, trmsmit
I
receive pin configuration and handshake with DIE-switches.
Results are recorded on built-in printer, external printer
or
computer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
