Need help?Do you have a question about the Thermo SORVALL RC-12BP and is the answer not in the manual?
General| Brand | Thermo |
|---|---|
| Model | SORVALL RC-12BP |
| Category | Laboratory Equipment |
| Language | English |
Detailed overview of the centrifuge's design, features, and operational capabilities.
Technical details including speed, RCF, dimensions, power requirements, and noise levels.
List of components and accessories included with the centrifuge.
Requirements for the optional network interface for data logging.
Steps to inspect the centrifuge for shipping damage and completeness.
Specifications for power supply voltage, frequency, and connection.
Guidelines for placing the centrifuge regarding environment and air circulation.
Procedures for physically setting up and securing the centrifuge.
Description of the main operational display panel showing speed, time, and temperature.
Description of the parameter setting and advisory message display.
Controls for the main power switch and keypad access security.
Keys for setting basic run parameters like speed, time, and temperature.
Access to advanced features, programming, and option selections.
Input device for speed, time, and temperature values.
Buttons to initiate and terminate centrifuge runs.
Explanation of error and status messages displayed on the SET screen.
Descriptions of serious faults that typically require professional service.
Procedure for powering up the instrument and initial startup checks.
Instructions for handling, loading, and balancing the rotor.
Step-by-step guide for standard operation and running the centrifuge.
How to save, recall, and perform runs using programmed parameters.
Configuration of special functions like QC RUN, slow start/stop, and limits.
Managing and monitoring sample temperature during operation.
Process to pre-condition rotor temperature before operation.
Safety guidelines for handling hazardous substances during operation.
Procedure for reducing speed based on rotor load to prevent failure.
Routine checks for cleanliness and procedures for cleaning components.
Information regarding lubrication requirements for centrifuge components.
Procedures to verify performance of speed, timer, and temperature controls.
Manual override procedure for accessing the chamber during power failure.
Contact details for ordering replacement parts and accessories.
Procedures for decontaminating units before service or return.
Terms and conditions of the product warranty.
Information on Waste Electrical and Electronic Equipment compliance.
To Next Page