RC12
BP™
Introduction & Description
1-5
Weight (uncrated, without rotor) 517 kg (1139 lb)
Dimensions
Width 83.8 cm (33 inch)
Depth 106.7 cm (42 inch)
Height, top of control console 112.8 cm (44.4 inch)
Length, power cord (minimum) 244 cm (96 inch)
Other
Depth, back of door to back panel 21.8 cm (8.6 inch)
Height, top of open door 170.4 cm (67.1 inch)
Height, rotor installation lift-over 90.2 cm (35.5 inch)
Diameter, chamber opening 66.8 cm (26.3 inch)
Supply Power Requirements
Supply Configurations (AC) 200 V, 60 Hz, 1Ø
208 V, 60 Hz, 1Ø
220 V, 60 Hz, 1Ø
230 V, 60 Hz, 1Ø
240 V, 60 Hz, 1Ø
200 V, 50 Hz, 1Ø
220 V, 50 Hz, 1Ø
230 V, 50 Hz, 1Ø (CE)
230 V, 50 Hz, 3Ø (CE)
240 V, 50 Hz, 1Ø
Recommended Supply Current
Single Phase 50 A
Polyphase 32 A/phase
Supply Power Receptacle
Standard NEMA 6-50R
230 V, 50 Hz, 1Ø CEE-17 (63A, 2-pole
and earth, 1Ø)
230 V, 50 Hz, 3Ø CEE-17 (32A, 3-pole
neutral and earth, 3Ø)
Parts Supplied
Parts supplied with your RC12BP™ Centrifuge include:
77203 Operating Instructions Manual, RC12BP™
77204 Condensed Operating Instructions, RC12BP™
56418 Program Log Pad, RC3BP™ & RC12BP™
68025 Wrench, Open-End, 9/16-inch
22001 Preinstallation Kit (supplied separately)
Refer to Table 4-1 (on page 4-2), for rotor information. For more
information, refer to a current SORVALL
®
Product Guide, or
contact Thermo or your local representative for SORVALL
®
products.
To Next Page