Thermo LabSystems Multiskan EX - 1. INSTALLATION (continued); Lamp Installation

1. Lamp
2. Chopper
3. Filter
4. Fan
5. Film whecl slot
6. ssor ckuit
7. Serial RS-232C DL switches
Figure
2.
Multiskan RC internal view
NOTE:
Do not toush the reflacrive surface oh the Lamp or the bulb iklf,
Unpack the lamp. Fit the lamp contacts to the terminal socket inside the insmment (Fiy.3).
Place the lamp in its place (Fig. 21).
Figure 3. Inscallation of lamp
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com