Thermo LabSystems Multiskan EX - Page 134

I, absorbance measure ent with point to point calculation with 4 standards and 2 replicates on eve~
lank samples are sihra
before standards. Results are printed on the built-in printer.
AS MODE
1
or EPITEW
or ENTER
2
AS P
AS P
I
9
CALC P or ENTER
3
CALG P or ENTER
2
15
1 P Y EIA
one of the measurement modes
FILTER 340 (default value)
one
of the blanking possibilities
2 SINGLE WELL BLA
WELL A1 (default value)
I BL ON EVERY PLATE or
1 BL ON EVERY PLATE
READY! XX:W
one of the calculation meth
NB OF STDS 2 (default value)
NR OF STDS 3
PL 1 (default value)
STA 1 0.000 (default value)
STA 2 0.000 (default value)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com