Thermo LabSystems Multiskan EX - Page 138

surement at 405 nm. Blanking on well Al (blank well only on the first
cum fit with 2 sbndards and 2 replicates (positions: B1, CI, DL, E1). Same standard
plates.
standard concentmtions mgl. 2 plates are measured. Scale used is Iogflin. External printer for
remrdi redts.
one of the program modules
4 Cubic spline
READY! XXYY
one of the measurement modes
FILTER 340 (default)
one ofthe blanking procedures
2 SINGLE WELL BEA
BLANK WELL A1
1 BLANK ON EVERY PLATE or
one of the calculation modes
NO OF STBS 1 (default) a
NO OF WPL 2
STDl REPE2 C1
STA 2 0.000
STA 2 1.000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com