Thermo LabSystems Multiskan EX - Page 150

dification is lead to pcb
ctorxl, &bits wide so
into data channels D3-DO.
converter
when the
result is read.
Signal A0
is LOW during the modification
(12-bits modification).
en reading
8 upper bits sig
4 lower bits signal A0 is
modification
is
starred.
hen STS-signal is
HIGH, converter is
converting.
Wall-sensors
V9 and V11 (UGN3013U)
indicate the "home position" of the carriage.
When the carriage is in the "home position",
Document Release Section
Page
3511352-100-x 2.0 e 3 8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com