Thermo LabSystems Multiskan EX - Page 156

ULTISMAN RC and M
(LT108 1, Voltage
buffer between transmit
and receive signals.
It contains a voltage converter (5V - 9V)
which adapts the logical levels of the transmit
and receive signals.
ultiplexer)
is controlled
switch
S6 switches.
*Q
** Default setthg
by manufacturer
Table 3-7
DIP switch S6 settings
AO-A7 Data- and swobe-signals
for optional printer
IEEE-488 address
selection, set
with BIP-
switch $5
-
C0 Reset line for
assembly, LOW active
C1-C3
AD converter channel
selection
C4 READY-signal from
SKANPRI assembly,
LOW active
Table 3-8
833 Input and Output signels
B33 (8255, Inpur/Output controller).
Address space of CS8
is 701-1-7FH. Table
3-10 illustrates a description of input and
output signals.
Document Release
Section a&
e
3511352-100-X 2.0 1 14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com