Thermo LabSystems Multiskan EX - 3.4 Error Messages; Command, Module, and Speed Errors (ER3-ER5, ER13-ER14); Filter and Light Errors (ER6-ER10); Operational and Positioning Errors (ER11-ER12, ER15-ER16)

Command em
Filter not insralled in fdtsrwheei
Fitter timeout
Filter out of psiuon tolerance
Not enough light
Too much light
Pinhole plate operation failure
Filter not able to ag$luunation
Lamp failme
Chopper too low
Plate stepper timeout
Plate position
cmr
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com