Thermo LabSystems Multiskan EX - Page 45

1. Lamp
2. Chopper
3. Filter
4. Fan
5. Filter wheel slot
6. NAPSU2 (keyboard) circuit board
7. bSB disptay circuit board
8. SC brine) circuit bad (qrion)
9. MUSCUnAp
10. Connecmr for built-in prinm
11. Conneetor for Cenmics interface,
optional RS-232C inredace or
12.
Figure 2. Mutti MS incemal view
Unpack
lhs lamp. Fit the lamp contacts to the temina! sacket inside !.he inslrument (Fig.3).
Do not touch the reflective surface of the Lamp or the bulb itself.
Place (he lamp in irs place (Fig. 21).
Figure 3. Installation of lamp
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com