wftwze cOmg&s pro
modules, software pac
es which are combinations
06
m
and dculation modes.
The following
program
modules are available:
1.
Primary
EL4
software
2.
Agglutination software (optional)
3.
Cut off software (optional)
4.
Cubic spline safwrwrue (optional)
Module
1:
Primary
EEIA
This ~Ftware is a
basic
software to
perlm
EIA
mpasuremenrs. It includes the following measlvernent modes:
absorbance,
dual
wavelengrh, two pint. kinetic. multivawelengrh mode and computer control.
The following calculation modw
can
:
factor.
lineax
stan
.
smandard line, limit, double limit.
column suba;rction and point
to
Module
2:
Agglurination software (optiond)
This module enables agglutination measuremen&.
A
id
optics @inhole
optics)
is
en into use.
20
mdings
are
faken per each well. Wcsults are sent via interface for further processing.
Module
3:
Cut off software (optional)
Thereare diferentcutoff calculations available in this module: double Limit,
range,
fixedcut off and floating cut
off.
Module
4:
Cubic spline (optional)
Measurement modes: available
am
absorbance.
dual
wavelengk two pint
and
kinetic.
Calculation mode: available is cubic spline.
Changing bstween mcdules
occurs
by
First
pressing the
S
key.
More memory capacity
is
Cards
;ire
prograsnmed by
Labsysms
upon request-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
