27
be
stored into the memory of the insmment
for
law
use.
y. When it
is
pressed the inswent
asks
For program numbcr
(PROGR
ER), which can
tx
I
m64.
Enlea the program number. SAVING DATA
is
blinleingon the diqlay fora while.
The
stored program can
be
laken later into use with he RECALL key
and
using the same prognm numks.
The following general parameters
can
be
selected with the PARAM key (and
UE
mow keys or
R
key):
1.
PKD4TE.R FORMAT (header inEomation
and
absorbances are sent
via the interface)
2.
COMPUTERFOR
(only absorbances are sent via the interface
in plate format)
3.
OLD MCC FORfkIAT(onIy absorbances are sent via the interface in
solumn format)
PLATE MOVE
The
speed
at which the plate is moved can
be
selected:
1.
comous
(5
r;)
2.
STEP MODE
(25
s)
Program
in
the mernoryof the
instnunent
are
princedonthe built-inprisiter.
PRJNER ONIOFI:
Odoff selection of the built-in printer. When the printer is suppres
SELECTION rsults are automatically sent via the interface.
When he instrument
is
switched on, the larest selection will
be
valid.
PLATE ANALYSIS:
After results have been presented
in
the microplate format. the insuurlent
sends
via
the interface the mean value. minimum value. maximum value.
delta value. smdard deviation value, delta prcenmge and coefficient of
variationprcenraye foreverycalvmnand row andalso forthe whole plate.
9
MIXWG
Odoff scleftion of the analysis:
1.
ANALYSlS
OFF
2.
ANALYSIS ON
(nor available an module
2
and
4)
Nurnbea of filters and filter wavelengths
can
Na
ClF
1
bee of filters
(I
-
8
or
gcd
wirh
the mow
S.
FILER
1
WAVEL
30
Filter wavelengths in nanomem can
bc
entered oc changed with
thc
mow
and
The entered values arc
uscd
until changed.
Date and lime (year, month, day oT the week, how, minute)
can
changed with the mow
and
number keys.
On the printout of the exccrnal printer
an
empty mw
can
Ihc
results of the mws (print out spacing).
On!olf selection of the printout
1.
NO SPACING
2.
PRWTOUT SPAClNC
Mixing of the rnicroplsle before mmWmGnK
is
s
1.
MIXING OFF
2.
MIXING OW
*
MIXING
FAST
*
MIXING MEDIUM
*
MIXING SLOW
-
MIXLNG
TIME
enter the time in seconds
(0-
Dcfaulr value
is
lS
s.
10 MODULE LISTMG
List ol modules is printed out.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
