Thermo LabSystems Multiskan EX - Page 83

42
Appendix 4
Module 1, absorbance measvrement with point (o pint calculation with 3 smWs and 2 replicates on every plak
Blank samples are sirualed before smdards. Rcsulv; are printed on the built-in printer.
Key to be pressed
MEAS MODE
1
MEAS PARAM or EMTER
2
MEAS PARAM or
1
CAeC MODE
9
CALC PAWAM or E
3
CA&C PARAM or ENTER
2
READY! XXYY
one of the measurement modes
SORBANCE MODE
FILTER. 340 (dcfaulr value)
one of
the blanking possibilities
2 SIKLE WELL BL
WF;U A1 (default vduc)
I BL ON EVERY PLATE
READY! XRYY
one of rhe calculation methods
9 PONT TO POINT
OF STDS
2 (default value)
NR OF STDS 3
OF WL I (defaulL value)
NROFWL.2
STAI'IDARD 1 0.009 (default value)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com