Thermo LabSystems Multiskan EX - Page 85

Module 3, absorbance mwurementat 450 nm. B1 on well Al. Floating cut offmlalcularion with cut offquaLion
(P+wx0.5. Grey aea 0.02. Tntevreurhion c z -.Check out he printing: resulv; sent to external printer.
Key lo be pressed wedure performe
3
ENTER
MEAS MODE
1
MEAS PARAM or
ENTER
450
rnAS PARAM or ENTER
2
MEAS PARAM or
MEAS
PARAM or
1
CALC MODE
4
W
(, Sm. P. +, SW, N.) x 0.5
ENTER
2
ENTER
3 cut off
one of
the measul-sment modes
one of
the blanking procedures
1 U ON EVERY PEA
one of the calcularion m
4 CUT OFF
CUT OFF EQUATION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com