EasyManua.ls Logo

Thermoplan BW4c-CTM - Material Damage Prevention

Thermoplan BW4c-CTM
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
12 / 60 © Thermoplan AG
4.3.3 Material damage
NOTICE
Danger of material damage
Incorrect use of the coffee machine or the wrong, faulty spare parts can result in
material damage.
u Check whether the coffee machine to be installed complies with the applicable
federal, national, or municipal plumbing codes.
u The coffee machine is designed only for indoor use.
u Clean the coffee machine before longer periods of non-use. Remove and empty
the grounds container, and disconnect the copy machine from the mains supply.
Remove, empty and clean milk container; store it with the lid open.
u Leave the refrigerator door open.
u Only operate the coffee machine at an ambient temperature of 16°C to 32°C.
u Set up the coffee machine on a flat, horizontal, stable and heat-resistant surface.
u Do not position the coffee machine where a water jet could be used for cleaning.
u Leave a free space of at least 50 mm in front of air vents.
u Always store the coffee machine a temperature above 0°C in a dust-free and dry
environment.
u The upper edge of the coffee machine must be at least 1.5 m above the floor.
u Only use original Thermoplan cleaning accessories.
u Never operate the coffee machine without drip grid.
u Do not store explosive substances such as aerosol cans with a flammable
propellant in the interior of the coffee machine.

Table of Contents

Related product manuals