EasyManua.ls Logo

ThermoPro TP-03 - Advanced Usage and Care; Operating Range and Hints; Maximizing FAST CALC and Normal Modes; Safe Handling and Measurement

ThermoPro TP-03
3 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LIMITED 90 DAYS WARRANTY
ThermoPro warrants this product to be fr ee of defects in pa rt s, materia ls and
workmanship for a p er iod of 90 da ys, from date of pu rch as e.
Should any repairs or servicing under this warranty be required, contact Customer
Service by phone or email for instructions on how to pack and ship the product to
ThermoPro.
CUSTOMER SERVICE
Telephone: 1-877-515-7797(USA & Canada only)
Email: service@buythermopro.com
Hours: Weekdays 9:00 AM- 5:00 PM EST
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
200°F) for more than 1 minute.
Always take your reading in the thickest available portion of meat. Thin portions
of meat are difficult to measure because they tend to cook through fast. Avoid
touching bone. If the tip touches the bone or heavy fat area of the meat, or if the
tip is not deep enough, take a second reading to ensure accuracy.
Not intended for use by persons ages 12 or under.
CARE OF YOUR THERMOMETER
Do not tou ch the sta inle ss port ion of the th ermometer du ring or ri ght aft er
measuri ng te mperatur es s in ce i t wil l be hot.
Do not place the unit in dishwasher or immerse in any liquid. To clean, wipe the
probe tip with a damp soapy cloth or sponge and then dry.
Remove battery if stored for more than four months.
Do not leave exposed to extreme high or low temperatures since, this will damage
electronic parts and plastics.
Do not leave the thermometer inserted in food during cooking.
-4-
AUTO SHUTOFF
This thermometer will automatically turn off if no buttons are pushed in 2 minutes.
RESETTING THE UNIT
Reset the unit by pressing the RESET button if the unit does not work properly.
is below 32°F or above 428°F, LO or HI will show on the display.
HELPFUL HINTS
When measuring multiple or different foods and meats, it may be desirable
to cool the probe by rinsing the tip with cold water between readings.
It is recommended that you wipe the probe tip clean between readings. This is
especially important when taking readings form different foods and meats.
When the tip is cold you can “force” the processor into FAST CALC mode by
pressing Start a second time. You will hear a Beep.
Pressing the Start button when unit is in Lock phase will change to NORMAL mode,
but unit will not change back to FAST CALC until fully cooled and auto-shutoff has
occurred.
The thermometer will not Auto-Shutoff when the display is in Lock phase (after
a FAST CALC reading). Press Start to return to NORMAL mode.
The thermometer is designed for temporary, hand held use. Do not use in an
oven. Do not leave inserted in extremely hot foods or liquids (anything over
In NORMAL mode, the unit's temperature range is 32°F to 42F. If the temperature
OPERATING RANGE
-5-

Related product manuals