Thermor R4GHD2-Mk22 - 4.1.4.2 - PILOT WIRE programming

User’s manual User’s manual
GB
 69
4.1.4 - Prog mode
4.1.4.1 - WEEKLY programming
The Weekly PROG will follow the programming recorded in this menu.
Press the
button
AUTO
Set : D/H/Min
Setting : D/H/Min is displayed on the
screen.
Press once on the
button
OK
Set : Prog
Prog setting is displayed.
Press
to conrm.
Press the or
button
OK
PROG: Local.
PROG: Weekly is displayed on the
screen; press
to conrm.
Press to display
programs for each
day of the week
OK
PROG: Monday
12 241860
Press to modify the program for one day of the week
The and buttons are used to select COMFORT mode (two small bars) or ECO
mode (no bars at all).
The and buttons are used to browse hour by hour.
Press
to conrm to go on to the next day.
Once you reach Sunday, the «return to menu» screen is displayed, press to return
to the “Settings: Prog” menu
Pres the left  or
 right scroll button
several times until
the selection arrow
is on Prog mode, to
activate Prog mode
OK
The  mode selection arrow blinks
above the currently selected mode.
4.1.4.2 - PILOT WIRE programming
By default, the external program is installed on all days of the week, returned by the central
programming. Thus, if your radiator is connected to a central programming installation, you
will not need to do anything other than to go into Prog mode.
Press the button
AUTO
Set : D/H/Min
Setting is displayed on the screen.
Press the
once
OK
Set : Prog
Prog setting is displayed.
Press
to conrm.
Press the
or
button
OK
PROG: Central.
PROG: FP is displayed on the
screen. Press
to conrm.
To quit the menu,
press the
button
AUTO
Day Hour
Je retourne à l’écran de repos.
Equateur2_1880-1585_interieur.indd 69 18/06/12 06:22