Thermor R4GHD2-Mk22 User Manual

User’s manual User’s manual
GB
 85
11.1.2 - How do you modify the Comfort temperature ?
To modify the displayed
temperature, press on
the keys + or – .
OK
Confort Temp
The temperature changes in
steps of 0.5°C and ashes.
Validate by pressing on
key
.
OK
Day Hour
The new chosen temperature
is displayed.
The heating indicator
is displayed on the screen if the ambient temperature is lower
than the displayed temperature
Wait for at least 6 hours until the temperature stabilises.
The black arrow moves along the consumption gauge, between the green level and the red in
accordance with the instruction required. The Comfort temperature recommended by Ademe is
19°C, this arrow indicates to you if your behaviour is within those recommendations or far from it.
11.1.3 - Limit the set Comfort temperature
You can limit the maximum comfort set temperature that is set to 28°C.
To limit the maximum Comfort
temperature, press the
and
+ buttons until “Set Max Temp”
is displayed.
OK
Max temp setting
The maximum Comfort
temperature is
displayed.
To modify the displayed
temperature, press the – button
until the required temperature,
then conrm by pressing the
button
OK
Max temp setting
Note: you cannot set the comfort temperature higher than the maximum recorded Comfort
temperature. The « » pictogram and the maximum comfort set temperature are
displayed.
11.2 - mode
11.2.1 - Using mode
This concerns reducing the temperature compared to the Comfort temperature .
It is recommended to use this mode for periods of absence between 2 and 48 hours, or
during the night, notably in bedrooms.
To activate the
mode, press several
times on the Left  or
right hand  keys the
selection arrow is on
mode.
OK
Eco ON
The mode selection  ashes
above the mode during the
selection.
Validate by pressing on
the key
.
OK
-3,5°
Day Hour
On the pictogram remains
lit up. The setting is validated
The recommended Eco temperature is -3.5°C compared to the Comfort temperature.
If you lower the Comfort temperature below the Eco temperature, the Eco temperature
will reduce by -0.5°C compared to the Comfort temperature. On the other hand, if you
increase the Comfort temperature, the Eco temperature will not change.
11.2.2 - How to modify the temperature ?
To modify the displayed
temperature, press on
keys + and – .
OK
Eco temp
The temperature changes by
steps of 0.5°C and ashes.
Validate by pressing on
key
.
OK
Day Hour
The new chosen temperature
is displayed.
Note : the maximum temperature in the ECO mode is 19°C.
11.3 - The Frost Free mode
The Frost free mode temperature is preset at 7°C ±3° and cannot be modied.
Equateur2_1880-1585_interieur.indd 85 18/06/12 06:23

Thermor R4GHD2-Mk22 Specifications

General

Brand	Thermor
Model	R4GHD2-Mk22
Category	Heater
Language	English