User’s manual
GBGB
84
11.1.2 - How do you modify the Comfort temperature ?
To modify the displayed
temperature, press on
the keys + or – .
OK
Confort Temp
The temperature changes in
steps of 0.5°C and ashes.
Validate by pressing on
key
.
OK
Day Hour
The new chosen temperature
is displayed.
The heating indicator
is displayed on the screen if the ambient temperature is lower
than the displayed temperature
Wait for at least 6 hours until the temperature stabilises.
The black arrow moves along the consumption gauge, between the green level and the red in
accordance with the instruction required. The Comfort temperature recommended by Ademe is
19°C, this arrow indicates to you if your behaviour is within those recommendations or far from it.
11.1.3 - Limit the set Comfort temperature
You can limit the maximum comfort set temperature that is set to 28°C.
To limit the maximum Comfort
temperature, press the
and
+ buttons until “Set Max Temp”
is displayed.
OK
Max temp setting
The maximum Comfort
temperature is
displayed.
To modify the displayed
temperature, press the – button
until the required temperature,
then conrm by pressing the
button
OK
Max temp setting
Note: you cannot set the comfort temperature higher than the maximum recorded Comfort
temperature. The «
» pictogram and the maximum comfort set temperature are
displayed.
Equateur2_1880-1585_interieur.indd 84 18/06/12 06:23
To Next Page
Loading...
Need help?
General
