User’s manual
GBGB
88
12.1.2 - The WIRE PILOT programme
By default, the programme mode on every day of the week is the external programme, the
one responding to the “pilot wire” order (FP) sent by the centralised external programming.
Using this, if your device is connected to a centralised programming installing, you have
no manipulation to be made other than to put yourself in Prog mode.
Press on key
Equilibrium
Set : D/H/Min
Setting appears on the screen.
Press once on key
OK
Set : Prog
Prog Setting appears.
Validate by
.
Press on keys
or
OK
PROG: Central.
PROG : FP displayed on screen.
Validate by
.
To leave menu, press
on key
Equilibrium
Day Hour
Return to rest screen.
To activate the Prog
mode, press several
times on the right
or left hand
movement keys until
the selection arrow is
on Prog mode.
OK
The mode selection ashes
above the mode during selection.
Equateur2_1880-1585_interieur.indd 88 18/06/12 06:23
To Next Page
Loading...
