28
Spas with ThermOzone
ThermOzone accomplishes water sanitation by using a powerful oxidant, Ozone. This 100%
organic compound reacts with and destroys bacteria, mold, fungus, etc. Through a proprietary
process, ozone effectiveness and air quality are maximized to provide optimal sanitation of your
spa.
Components
A
Ozone Generator : Using Corona discharge technology, the Ozone generator delivers 30
mg of Ozone per hour through the ozone injector.
B
Ozone Jet : A special laser jet provides a return back to the spa for the treated water.
Chemical Usage
1. Spas that have an Ozone installed should maintain a 1.0-3.0 ppm Chlorine level or a
1.0-3.0 ppm Bromine Level.
2. Depending on your usage, and if your water is clear, you can continue to reduce the amount
of chemicals you are using by trying to add sanitizer on a once weekly schedule, and
performing the rest of your weekly maintenance (Stain and Scale, Natural and Clear etc...)
on a bi-weekly basis.
Note: Chemicals must be maintained at a proper level. Take into consideration how often the
hot tub is used and the number users.
3. For the Ozone to work more efciently, please remember to clean your lters bi-weekly.
Make sure you go no longer than one month between lter cleanings.
Note: If water becomes cloudy, please resume all chemical maintenance on a regular weekly ba-
sis. If your usage increases, you may have to add an additional sanitizer treatment in the middle
of the week.
Saps with Ozone
To Next Page
Loading...
Need help?
General
