30
The RQL search statement in the Query field specifies which tag protocols will be read, which
antenna ports are to be used, how long the query is to be run, and other read operation
parameters. The query can be run once or continuously. See the figure for a list of available
stock queries.
3. Click the Start button at the bottom right to begin continuously reading tags. Tag data
is displayed. Each row in this example shows sequential tag number, number of times
tag was read, tag data, antenna, and protocol.
4. Click Stop to stop the tag search.
Note
IMPORTANT: Click the Stop button before exiting. You MUST stop the query
before exiting the query page or the reader will continue to transmit RF energy on
its antennas.
To Next Page
Loading...