Customer Quality Management
© 2018 THINKWARE. All rights reserved. 19
7. Installation
• Connecting the power of charging cable
① Tightly pinch the (+) wiring of the fuse holder
and charging cable using a plier
② Select a B+ power 20A fuse or higher
③ Connect the genuine fuse and external battery fuse
to the fuse holder
④ Check the power output direction of the fuse slot and
connect the fuse holder
Take care on the connection so the fuse holder
does not fall out while driving
* Use an ACC power fuse for the BAB-50 model.
To Next Page
Loading...
