Need help?Do you have a question about the Thinkware BAB-100 and is the answer not in the manual?
Details recommended locations for the external battery installation, emphasizing interference with seat adjustment.
Guides the process of installing the charging and output cables, including routing and securing them.
Explains the steps for installing the constant power cable, from A-pillar routing to dash cam connection.
Provides guidance on selecting appropriate fuses for the installation, including recommended types and safety checks.
Details the use of a dual fuse holder for stable power connections and preventing loose connections.
Instructs on how to check fuse slot orientation and correctly insert the fuse holder for power output.
Explains how to connect the charging cable's power, including selecting fuses and connecting to the fuse holder.
Guides the connection of ACC IN wires to the fuse slot and re-connecting the original fuse.
Details the process of connecting the ground wires to the vehicle chassis using a bolt.
Explains how to connect the output cable's power, ACC, and GND wires to the dash cam's constant power cables.
Provides instructions on neatly organizing any excess wiring along the vehicle's genuine wiring paths.
Describes connecting the output and input cables to the external battery's respective ports and setting the power switch.
Details how to secure the external battery in place using the provided Velcro tape.
Guides on testing the external battery and adjusting camera settings like parked recording and voltage timers.
Highlights precautions for the charging cable, including avoiding thin cables and direct soldering.
Provides general advice for installation, emphasizing fuse checking, vehicle manual consultation, and using dual fuse holders.
General| Product Type | Battery Pack |
|---|---|
| Compatibility | Thinkware Dash Cams |
| Input Voltage | 12V / 24V |
| Charging Time | Approx. 90 minutes |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Storage Temperature | -20°C to 70°C |
| Type | Lithium Polymer |
To Next Page
