Need help?Do you have a question about the Thinkware BAB-50 and is the answer not in the manual?
Details the recommended locations for installing the external battery unit inside the vehicle.
Provides steps for routing and connecting charging and output cables within the vehicle.
Guides on how to route the constant power cable from the kick panel to the dash cam.
Explains how to select appropriate fuses and recommended fuse slots for power connection.
Details the usage and benefits of the dual fuse holder for stable power connections.
Instructs on verifying the correct fuse slot orientation for power output connection.
Outlines the process of connecting the charging cable's power to the fuse holder.
Guides on connecting ACC IN wires and ground wires to vehicle components.
Details connecting the output cable and organizing excess wiring neatly.
Describes connecting cables to the battery and securing the unit.
Guides on testing the battery and adjusting camera settings for optimal use.
Details precautions regarding the extension and connection of the power input cable.
Provides general advice and safety considerations for the installation process.
General| Product Type | Battery Pack |
|---|---|
| Compatible Models | Thinkware Dash Cams |
| Capacity | 4, 500mAh |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Input Voltage | 12V/24V |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Output Voltage | 5V |
| Charging Time | Approximately 45 minutes |
To Next Page
