Customer Quality Management
© 2018 THINKWARE. All rights reserved. 25
9. Precautions
• Charging Cable (Power Input Cable)
① Extending the cable with a thin cable under the standard specification (14 AWG) is not allowed.
If extended, a voltage drop occurs so you cannot charge the battery and abnormal noise is generated while starting the vehicle
② Directly connecting (soldering) the charging cable with the vehicle fuse or wiring is prohibited
If connected and the contact area is incomplete for any reason, heat and combustion is generated due to a high current
③ If extending the charging cable is required, use a 14 AWG cable and solder it.
A 14AWG charging cable and fuse holder is provided by default
To Next Page
Loading...