Third Reality 3RSM0147Z - Setup with Compatible Third-Party Zigbee Hubs

09
Third Reality supports integration with various open Zigbee platforms,
including Amazon Echo with built-in Zigbee, Samsung SmartThings,
Home Assistant (with ZHA or Z2M), Homey and Hubitat. If you own any of
these devices, you can pair the smart soil moisture sensor directly with-
out the need for an additional bridge or hub.
Ensure your Zigbee Hub is already set up within your smart home
system.
Open the battery cover, install the battery, press and hold the reset
button for 5 seconds and release the hold; The blue blinking LED
light indicates the sensor enters Zigbee pairing mode.
Open your smart home app and follow the on-screen instructions
to begin the Zigbee pairing process.
The sensor will flash and then turn warm white, indicating it has
successfully paired with the Zigbee hub.
You can now use your smart home app to turn the sensor on/off.
1.
2.
3.
4.
5.
Setup with Compatible Third-Party
Zigbee Hubs