Third Reality 3RSM0147Z - Pairing with Smartthings

App: SmartThings App
Devices: SmartThings Hub 2nd Gen(2015) and 3rd Gen(2018), Aeotec
Smart Home Hub.
Before pairing, check for updates to make sure the SmartThings
Hub firmware is up to date.
1.
Pairing with SmartThings
Pairing steps:
Open this link in your PC browser. Log in your SmartThings Ac-
count.
https://bestow-regional.api.smartthings.com/invite/adMKr50EXzj9
Click "Enroll" --"Available Drivers" -- "Install" to install the
device driver.
Add SmartThings drivers for Third Reality Temperature and Humid-
ity Sensor
2.
10