Website: http://find.hubitat.com/
Open the battery cover and install the batteries, press and hold the
reset button for 5 seconds and release the hold; The LED light turns
blue blinking, indicating it enters pairing mode.
Visit your Hubitat Elevation hub device page from your web brows-
er, select the Devices menu item from the sidebar, then select Dis-
cover Devices in the upper right.
Click Start Zigbee Pairing button after you select a Zigbee device
type, the Start Zigbee Pairing button will put the hub in Zigbee
pairing mode for 60 seconds.
Pairing is completed.
Set device type to generic Zigbee Temperature/Humidity sensor,
Save Device.
Tap Apps, and Create New Basic Rules, select Humidity Sensor -
smart soil moisture sensor, turn on your plant watering system
when humidity changes.
1.
2.
3.
4.
5.
6.
Pairing with Hubitat
Pairing steps:
14
To Next Page