thomann Harley Benton DNAfx GiT - Activating Effect Block; Deactivating Effect Block; Editing Effects

1. Turn [MODE] to select a disabled eect block.
2. Press [MODE].
ð
The eect block is activated. The display shows ‘ON’ .
1. Turn [MODE] to select a enabled eect block.
2. Press [MODE].
ð
The eect block is deactivated. The display shows ‘OFF’ .
1. Turn [MODE] to select the desired eect block.
2. Turn [VALUE] to select the desired value (display shows ‘GAIN’ ‘MID’ ‘PRES’ ‘BASS’
‘TREBLE’ ‘MST’ ).
Activating eect block
Deactivating eect block
Editing eects
Operating
DNAfx GiT
33