thomann Harley Benton DNAfx GiT - System Settings Configuration

6.8 System settings
1. Press [SYSTEM] to call up the system settings.
2. Turn [VALUE] to select the desired submenu.
3. Press [VALUE].
ð
The setting is conrmed.
Submenu Description
‘INPUT LEVEL’ Sets the input level of the device, -∞~+6 dB.
‘SCREEN’ Adjusts the brightness of the display.
‘CAB SIM TRHU’ Sets the dierent output options in the
speaker box simulation of the device.
‘RESET’ Resets the device to factory defaults.
‘OTG OUT’ Sets the output level for OTG mode.
Operating
multi eects unit
46