6 Operation
6.1 Functions
Check for proper connection of all cables before switching the unit on.
Before switching the unit on, turn the [VOLUME] control down to minimum.
Use the main switch [ON/OFF] on the rear panel to turn the unit on.
When the drum module is not used, it will switch off automatically after 20 minutes. To switch
it on again, press the [ON/OFF] push button.
To set the volume, hit a pad while slowly turning the [VOLUME] control clockwise.
Switching on
Automatic switchoff
Adjusting the volume
Operation
e-drum modul
24
To Next Page
Loading...
