In factory default condition, all user kits are assigned with the same standard setting
and consecutively saved in the memory as ‘U01’ to ‘U31’. I.e., you will overwrite an
existing standard user kit of the module with every new user kit that you store. Thus,
you're prompted ‘Replace it’ for confirmation.
Any unsaved changes are discarded when you turn the drum module off.
The storage process can be cancelled at any time by pressing [EXIT].
6.4 Pad settings
Use the EQ to adjust the trigger sounds of a drum kit globally (see chart below).
1. Press the [SETUP] button and use the rotary control [–] / [+] the select the parameter
„Equalizer“.
2. Use the rotary control [–] / [+] to select the desired value (default value is 001).
3. Press [ENTER] to confirm.
ð
The next parameter appears in the display.
Equalizer
Operation
e-drum modul
38
To Next Page
Loading...
