Parameter, display Description Value range
Pitch Pitch –10 … +10
Reverb Reverb 0 … 127
Advanced
After you have assigned all the pads with the desired voices and adjusted the other parame‐
ters, you can save the settings as a user kit in the unit. To do this, follow these steps:
1. Press the [EXIT] button.
ð
The display will prompt ‘Save it?’.
2. Press the [ENTER] button to store the settings.
ð
Next to the ‘User Kit’ indication, the kit number is flashing in the display in ‘U01’
format.
3. Use the rotary control [–] / [+] to select any location.
4. Press [ENTER] again to store your user kit at the desired number.
Storing settings
Operation
MPS-500
37
To Next Page
Loading...
