To adjust the remaining parameters, please proceed as follows:
1.
First, select the desired kit, see
Ä
Chapter 6.1 ‘Functions’ on page 24.
2. Press the [EDIT] button to change to the edit mode.
ð
The indicator LED of the button lights up. Next to the ‘Edit Mode’ indication, the cur‐
rent kit number is flashing in the display.
3. Press the [ENTER] button, to jump to the next parameter (see chart below).
4. Use the rotary control [–] / [+] to adjust the respectively shown value.
5. Press [ENTER] to jump to the next parameter, and so on.
Parameter, display Description Value range
Voice Voice assigned to the trigger 1 … 418
Volume Volume 0 … 127
Pan Trigger position within the stereo panorama –64 … +63
Adjusting trigger parameters
Operation
e-drum modul
36
To Next Page
Loading...
