In factory default condition, all user kits are assigned to standard settings. User kit
programming is described in detail in chapter
Ä
Chapter 6 ‘Operation’ on page 24.
The selected drum kit is instantly active.
Press the [CLICK] button to turn the Click function on or off. The indicator LED of this button is
lit when the Click is turned on. All setting options are described in detail in chapter .
Use this function to count the strokes within a certain period of time.
1. Press the [SETUP] button to open the device settings menu.
2. Use the rotary control [–] / [+] to select the parameter ‘Count Sensitivity’.
3. Press [ENTER] to confirm and then adjust the touch sensitivity with the rotary control [–] /
[+] in a range from 0 to 24 (default value is 16).
4. Press [ENTER] to confirm.
5. Press the [COUNT] button to activate the counter mode.
ð
The display indicates the current counting period (‘Count Time’).
Click function
Stroke counter
Operation
e-drum modul
26
To Next Page
Loading...
