thomann Millenium MPS-500 - Adjusting Song and Drum Set Volume

1. Press the [SETUP] button.
2. Use the rotary control [–] / [+] to select the parameter ‘Accomp Vol’.
3. Press [ENTER] to confirm.
ð
The current song volume value is flashing in the display.
4. Use the rotary control [–] / [+] to adjust the desired volume in a range from 0 to 24
(default value is 11).
5. Press [ENTER] to confirm.
1. Press the [SETUP] button.
2. Use the rotary control [–] / [+] to select the parameter ‘D.Drum Vol’.
3. Press [ENTER] to confirm.
ð
The current drum set value is flashing in the display.
4. Use the rotary control [–] / [+] to set the desired volume in a range from 0 to 24 (default
value is 11).
Adjusting song volume
Adjusting drum set volume
Operation
MPS-500
31