thomann Millenium MPS-750X - Installation and Starting Up; Pad and Pedal Connection

Mounting the Hi-hat on the rack
1. Screw on the wing nuts of the hi-hat tripod with pedal (19) and open the feet. Then tighten the wing nuts of the brackets.
2. Insert the hi-hat holder (20) into the hi-hat tripod with pedal (19) and tighten the holder clockwise.
3. Unscrew the wing nuts from the Hi-hat holder (20) and take the felt washers o the holders.
4. Place the Hi-hat (12) as shown in the gure on the holder.
5. Place the felt washers on the cymbals and x the Hi-hat (12) with the associated wing nut on the holder.
Assembly
MPS-750X
15