3 Assembly
Overview
Loosen the screws of the clamps before sticking the tubes together. Mount the various elements in the specied sequence. The
nal positions of the components are shown in the illustration below.
12 Hi-hat pad (10 inch)
13 Crash (12", two zones, with stop function)
14 Ride (14", three zones, with stop function)
15 Tom pad (10", two zones, mesh head)
16 Snare pad (10", two zones, mesh head)
17 Bass drum pad (8" mesh head)
18 Bass drum pad pedal
19 Hi-hat tripod with pedal
Assembly
MPS-750X
7
To Next Page
Loading...
