Setting up the bass drum pedal
1. Screw the bass drum pad and the associated foot (17) with the supplied screws using the drum key (23).
2. Engage the bolt of the foot machine (18) into the provided recess on the bass drum pad (17).
Mounting the drum module on the rack
1. Put the drum module (21) up to the stop into the free bracket of the left crossbeam (5). Insert the D-sub plug of the multiple
cable (22) into the provided socket on the bottom side of the drum module.
2. Tighten the D-sub plug with the hand screws.
3. Align the module and tighten the wing nut of the bracket.
Bass Drum positioning
Place the pedal with the bass drum pad centred under the rack. Position the bass drum pedal centred in front of the pad.
Assembly
e-drum set
16
To Next Page
Loading...
